Refer to the exhibit. The Ethernet interface on Router2 goes down and the administrator notices that the route is still valid in the routing table of Router1. How much longer will it take for Router1 to mark the route invalid by setting the metric to 16?

Refer to the exhibit. The Ethernet interface on Router2 goes down and the administrator notices that the route is still valid in the routing...

Refer to the exhibit. RIPv1 is running on all three routers. All interfaces have been correctly configured with addresses in the address ranges that are shown. Which route would you see in the routing table on router CHI if the routers are configured with the commands that are displayed in the exhibit?

Refer to the exhibit. RIPv1 is running on all three routers. All interfaces have been correctly configured with addresses in the address ran...

Refer to the exhibit. Router1 is running RIPv1. What command was entered into Router1 to configure the gateway of last resort?

Refer to the exhibit. Router1 is running RIPv1. What command was entered into Router1 to configure the gateway of last resort? no auto-summa...

Refer to the exhibit. All routers that are shown are running the RIP routing protocol. All unknown IP traffic must be forwarded to the ISP. What router or set of routers are recommended to have both a default route and the default-information originatecommand issued to implement this forwarding policy?

Refer to the exhibit. All routers that are shown are running the RIP routing protocol. All unknown IP traffic must be forwarded to the ISP. ...

Refer to the exhibit. What can be concluded from the routing table output of router B?

Refer to the exhibit. What can be concluded from the routing table output of router B? A static default route has been configured on B. The ...

Refer to the exhibit. A network consists of multiple routers. What can be verified when the show ip protocols command is issued on one of the routers in the network?

Refer to the exhibit. A network consists of multiple routers. What can be verified when the show ip protocols command is issued on one of th...

Refer to the exhibit. All routers in the exhibit are running RIP v1. The network administrator issues the show ip route command on router A. What routes would appear in the routing table output if the network is converged? (Choose two).

Refer to the exhibit. All routers in the exhibit are running RIP v1. The network administrator issues the show ip route command on router A....

Refer to the exhibit. Router1 and Router2 are running the RIPv1 protocol. The network administrator configures the command network 10.1.0.0 on Router1. What network will Router1 advertise to Router2?

Refer to the exhibit. Router1 and Router2 are running the RIPv1 protocol. The network administrator configures the command network 10.1.0.0 ...

Refer to the exhibit. All routers are configured with valid interface addresses in the indicated networks and are running RIPv1. The network is converged. Which routes are present in the routing tables?

Refer to the exhibit. All routers are configured with valid interface addresses in the indicated networks and are running RIPv1. The network...

Which of the following would be the correct command sequence to enable RIP on Router B for all connected networks?

Which of the following would be the correct command sequence to enable RIP on Router B for all connected networks? RouterB# router rip Route...

What are three characteristics of the RIPv1 routing protocol? (Choose three.)

supports the use of VLSM uses hop count as a metric considers a metric of 16 as infinity has an administrative distance of 110 by default in...

What is the default update period in seconds for the RIP routing protocol?

10 12 15 20 30 60 ccna exploration 2 chapter 5 Exam Question And Answers  What is the default update period in seconds for the RIP routing p...

Refer to the output from the show ip route command. What can be concluded from the output of this router command?

A preferred route to the destination has not been set. There are two equal cost paths to network 1 .0.0.0. Both interfaces are being used eq...

Refer to the exhibit. The network that is shown is running RIPv1. The 192.168.10.0/24 network was recently added and will only contain end users. What command or set of commands should be entered on Router1 to prevent RIPv1 updates from being sent to the end user devices on the new network while still allowing this new network to be advertised to other routers?

Refer to the exhibit. The network that is shown is running RIPv1. The 192.168.10.0/24 network was recently added and will only contain end u...

Refer to the exhibit. The Ethernet interface on Router2 goes down and the administrator notices that the route is still in the Router1 routing table. How much longer will Router1 keep the down network in its routing table before marking it as possibly down?

30 seconds 90 seconds 155 seconds 180 seconds 255 seconds ccna exploration 2 chapter 5 Exam Question And Answers  Refer to the exhibit. The ...

Which of the following is considered a limitation of RIP v1?

RIP v1 does not send subnet mask information in its updates. RIP v1 is not widely supported by networking hardware vendors. RIP v1 consumes ...

What will happen if an interface IP address is entered for the address portion of the network command in a RIPv1 configuration instead of a network address?

The router will reject the command. A route to the host address will be added to outgoing RIP updates. A route to the host address will be ...

The following line was displayed in the output of the show ip route command. R 192.168.3.0/24 [120/3] via 192.168.2.2, 00:00:30, Serial0/0 What is the value of the routing metric?

3 12 20 30 120 ccna exploration 2 chapter 5 Exam Question And Answers  The following line was displayed in the output of the show ip route c...

Which two statements are true regarding the characteristics of RIPv1? (Choose two).

It is a distance vector routing protocol. It advertises the address and subnet mask for routes in routing updates. The data portion of a RI...

Which command or set of commands will stop the RIP routing process?

RouterB(config)# router rip RouterB(config-router)# shutdown RouterB(config)# router rip RouterB(config-router)# network no 192.168.2.0 Rout...

Which command will display RIP activity as it occurs on a router?

debug ip rip show ip route show ip interface show ip protocols debug ip rip config show ip rip database ccna exploration 2 chapter 5 Exam Qu...

Which three routing protocols are distance vector routing protocols? (Choose three).

RIPv1 EIGRP OSPF IS-IS RIPv2 ccna exploration 2 chapter 4 Exam Question And Answers  Which three routing protocols are distance vector routi...

Three routers running a distance-vector routing protocol lost all power, including the battery backups. When the routers reload, what will happen?

They will share all routes saved in NVRAM prior to the power loss with their directly connected neighbors. They will multicast hello packets...

Refer to the exhibit. What path will packets from the 192.168.1.0/24 network travel to reach the 10.0.0.0/8 network if RIP is the active routing protocol?

Refer to the exhibit. What path will packets from the 192.168.1.0/24 network travel to reach the 10.0.0.0/8 network if RIP is the active rou...

Which two conditions are most likely to cause a routing loop? (Choose two.)

random jitter implementation of classful addressing inconsistent routing tables incorrectly configured static routes a network converging to...

Which two statements are true regarding the function of the RIPv1 routing updates? (Choose two).

updates are broadcast only when there are changes to the topology updates are broadcast at regular intervals broadcast are sent to 0.0.0.0 b...

Which event will cause a triggered update?

an update routing timer expires a corrupt update message is received a route is installed in the routing table the network is converged ccn...

The graphic shows a network that is configured to use RIP routing protocol. Router2 detects that the link to Router1 has gone down. It then advertises the network for this link with a hop count metric of 16. Which routing loop prevention mechanism is in effect?

The graphic shows a network that is configured to use RIP routing protocol. Router2 detects that the link to Router1 has gone down. It then ...

Refer to the exhibit. The routers in this network are running RIP. Router A has not received an update from Router B in over three minutes. How will Router A respond?

Refer to the exhibit. The routers in this network are running RIP. Router A has not received an update from Router B in over three minutes. ...

Refer to the exhibit. If all routers are using RIP, how many rounds of updates will occur before all routers know all networks?

Refer to the exhibit. If all routers are using RIP, how many rounds of updates will occur before all routers know all networks? 1 2 3 4 5 6

What actions will occur after RouterA loses connectivity to network 114.125.16.0? (Choose two.)

What actions will occur after RouterA loses connectivity to network 114.125.16.0? (Choose two.) RouterB will include network 123.92.76.0 and...

Which two statements describe EIGRP? (Choose two.)

EIGRP can be used with Cisco and non-Cisco routers. EIGRP sends triggered updates whenever there is a change in topology that influences the...

What does a router running RIP do first with a new route that is received from an advertisement?

places it immediately in the routing table adjusts the metric for the new route to show the added distance for the route advertises this ro...

Which of the following methods does split horizon use to reduce incorrect routing information?

Routing updates are split in half to reduce the update time. Information learned from one source is not distributed back to that source. New...

Which of the following statements are correct about RIP?

uses a broadcast to update all other routers in the network every 60 seconds uses a multicast address to update other routers every 90 secon...

What metric does the RIP routing protocol consider to be infinity?

0 15 16 224 255 ccna exploration 2 chapter 4 Exam Question And Answers  What metric does the RIP routing protocol consider to be infinity?

What is a routing loop?

a packet bouncing back and forth between two loopback interfaces on a route a condition where a return path from a destination is different ...

A network administrator is evaluating RIP versus EIGRP for a new network. The network will be sensitive to congestion and must respond quickly to topology changes. What are two good reasons to choose EIGRP instead of RIP in this case? (Choose two.)

EIGRP uses periodic updates. EIGRP only updates affected neighbors. EIGRP uses broadcast updates. EIGRP updates are partial. EIGRP uses the ...

Which of the following can exist in a distance vector network that has not converged? (Choose three).

routing loops inconsistent traffic forwarding no traffic forwarding until system converges inconsistent routing table entries routing table ...

Which statement is true regarding cisco’s RIP_JITTER variable?

It prevents the synchronization of routing updates by buffering the updates as they leave the router interface It prevents the synchronizati...

What does the RIP holddown timer do?

ensures an invalid route has a metric of 15 prevents a router from sending any updates after it has introduced a routing loop into the netwo...

What is the purpose of the TTL field in the IP header?

used to mark routes as unreachable in updates sent to other routers prevents regular update messages from reinstating a route that may have ...

A router learns two paths with equal metrics to a destination network via the RIP routing protocol. How will the router handle packets to the destination network?

The router will install the first route it learned into the routing table. The router will install both routes in the routing table and load...

Refer to the exhibit. If RIP is the routing protocol, what is the value of the metric from router A to network 192.168.5.0/24?

Refer to the exhibit. If RIP is the routing protocol, what is the value of the metric from router A to network 192.168.5.0/24? 3 4 56 624 72...

CCNA 3 Final Question Answer, CCNA 3 Answer

CCNA 3 Total 3 Set Question and Answer Part-1 1 . A wireless client is attempting to establish a connection with a wireless access point. Wh...